Hydraulic spreader is designed for workshop work and can be used in assembly and tinsmith works, for works requiring the use of considerable static forces.
The device is designed for lifting, stretching, spreading, bending, straightening and pulling.
The set is placed in a transport case

Weight [kg] – 35.4
Working pressure [bar] – 620
Connection thread size [“] – 13 / 16-20UNEF
Maximum load [thous. kg] – 10
Cylinder piston stroke [mm] – 150
Purpose / use
The spreader can be used in assembly and tinsmith works to carry out works requiring the use of significant static forces.
Usage
Installation and use of the hydraulic system:
– Connect the pump hose to the actuator connector by screwing the union nut onto the thread. Make sure that the nut has been correctly
tightened.
– Close the drain valve by turning it clockwise.
– By moving the pump lever up and down, create pressure in it. After se