TECHNICAL DATA

Maximum working pressure: 1.4 MPa
Thread diameter of the air connection: 1/4 “
Maximum working temperature: 60 degrees Celsius
Tank material: Polycarbonate
Tank capacity: 8 cm3

INSTALLATION GUIDE
Place the device in a vertical position with the tank facing down.
Make sure that the connection is tight.
The filter should be placed in the pneumatic system as close as possible to the unit to which the filtered air is to be delivered.
Avoid exposure to direct sunlight, high temperatures and corrosive chemicals.
The water tank should be located below the water drain valve so that water can flow into it.

CONTROL
Dropping water
If there is no pressure, the water will automatically flow out.
If the device is under pressure, open the drain valve located on the bottom of the tank to allow water to fall.
If the water level exceeds the maximum allowable range, open the dr